Dell SE197FP Monitor - Manual (Page 6)

Power Management Modes
If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in
use. This is referred to as 'Power Save Mode'. If input from keyboard, mouse or other input devices is detected by the computer, the monitor automatically
resumes functioning. The following table shows the power consumption and signaling of this automatic power saving feature:
Activate the computer and the monitor to gain access to the OSD .
Pin Assignments
VGA Connector
Dimensions (with stand):
Height 401.3 mm (15.8 inches)
Width 412.7 mm (16.2 inches)
Depth <144.4 mm (5.7 inches)
Weight
Monitor (Stand and Head) 5.6kg (12.3 lb)
Monitor Flat panel only (VESA Mode) 4.1 kg (9.0 lb)
Weight with packaging 6.0 kg (14.6 lb)
Environmental
Temperature:
Operating 5° to 35°C (41° to 95°F)
Nonoperating Storage: 0° to 60°C (32° to 140°F)
Shipping: -20° to 60°C(-4° to 140°F)
Humidity:
Operating 10% to 80% (noncondensing)
Nonoperating Storage: 5% to 90% (noncondensing)
Shipping: 5% to 90%(noncondensing)
Altitude:
Operating 3,657.6 m (12,000 ft) max
Nonoperating 12,192 m (40,000 ft) max
Thermal dissipation 138.44 BTU/hour (maximum)
129.92 BTU/hour (typical)
VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption
Normal
operation Active Active Active Green 40.6 W (maximum)*
38.1
W (normal)**
Active-off mode Inactive Inactive Blanked Amber Less than 2 W
Switch off - - - Off Less than 1 W
* With Audio
** Without Audio
NOTE: The OSD will only function in the normal operation mode. Otherwise one of the following messages will appear
depending upon the selected input.
In Power SaveMode
Press computer power button
or any key on keyboard or move mouse