Dell XPS 15 (L501X, Late 2010) - Manual (Page 49)

Display 49
12
Display
WARNING: Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
CAUTION: Only a certified service technician should perform repairs on your
computer. Damage due to servicing that is not authorized by Dell™ is not covered
by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery
(see "Removing the Battery" on page 13) before working inside the computer.
Display Assembly
Removing the Display Assembly
1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the battery (see "Removing the Battery" on page 13).
3 Remove the module cover (see "Removing the Module Cover" on
page 15).
4 Remove the memory module(s) (see "Removing the Memory Module(s)"
on page 17).
5 Disconnect the antenna cables from the Mini-Cards.
6 Note the routing of the Mini-Card antenna cables and remove them from
the routing guides on base cover.
7 Remove the two screws that secure the display assembly to the base cover.