Dell AX4-5 User Manual
Page 23
Advertising
Cabling Your Cluster Hardware
23
Cabling a SAN-Attached Cluster to an AX4-5 Storage System
1 Connect cluster node 1 to the SAN.
a
Connect a cable from HBA port 0 to Fibre Channel switch 0 (sw0).
b
Connect a cable from HBA port 1 to Fibre Channel switch 1 (sw1).
2 Repeat step 1 for each cluster node.
3 Connect the storage system to the SAN.
a
Connect a cable from Fibre Channel switch 0 (sw0) to SP-A Fibre
port 0(first fibre port).
b
Connect a cable from Fibre Channel switch 0 (sw0) to SP-B Fibre
port 1(second fibre port).
c
Connect a cable from Fibre Channel switch 1 (sw1) to SP-A Fibre
port 1(second fibre port).
d
Connect a cable from Fibre Channel switch 1 (sw1) to SP-B Fibre
port 0(first fibre port).
Advertising