Dell PowerVault NX3300 - Manual (Page 116)

Error Code Message Information
LCD Message Power supply < number > is incorrectly configured. Check PSU.
Details Power supplies should be of the same input type and power rating.
Action Install matched power supplies and review proper configuration in this manual.
PSU0016
Message Power supply < number > is absent.
LCD Message PSU < number > is absent. Check PSU.
Details The power supply has been removed or has failed.
Action
1. Remove and reinstall the power supply.
2. Check cables and subsystem components in the system for damage.
3. If the issue persists, see
Getting Help .
PSU0031
Message Cannot communicate with power supply < number >.
LCD Message Cannot communicate with PSU < number >. Re-seat PSU.
Details The power supply may operate, however power supply monitoring is degraded. System
performance may be degraded.
Action Remove and reinstall the power supply. If the issue persists, see Getting Help .
PSU0032
Message The temperature for power supply < number > is in a warning range.
Details System performance may be degraded.
Action Check the system operating environment, including airflow and inlet temperature. Check
system logs for temperature and thermal component failures.
PSU0033
Message The temperature for power supply < number > is outside of the allowable range.
LCD Message PSU < number > temperature outside of range. Check PSU.
Details System performance may be degraded.
Action Check the system operating environment, including airflow and inlet temperature.
Check system logs for temperature and thermal component failures.
PSU0034
Message An under voltage fault detected on power supply < number >.
LCD Message An under voltage fault detected on PSU < number >. Check power source.
Details This failure may be the result of an electrical issue with cables or subsystem
components in the system.
Action
1. Remove and reinstall the power supply.
2. Check cables and subsystem components in the system for damage.
3. If the issue persists, see
Getting Help .
116