Dell P2010H Monitor - Manual (Page 7)

*[P2010H] color gamut (typical) is based on CIE1976 (83%) and CIE1931 (72%) test standards.
Resolution Specifications
Supported Video Modes
Preset Display Modes
Electrical Specifications
Physical Characteristics
Screen dimensions 20 inches (20-inch viewable image size)
Preset display area: 442.8(H) X 249.1(V)
Horizontal 442.8(H) mm (17.4 inches)
Vertical 249.1(V) mm (9.8 inches)
Pixel pitch 0.277 mm
Viewing angle 160° (vertical) typical, 170° (horizontal) typical
Luminance output 250 CD/m²(typical)
Contrast ratio 1000 to 1 (typical), 10000 to 1 (typical Dynamic Contrast On)
Faceplate coating Antiglare with hard-coating 3H
Backlight 2-CCFL edgelight system
Response Time 5ms panel typical
Color depth 16.7 million colors
Color Gamut 83%*
Horizontal scan range 30 kHz to 83 kHz (automatic)
Vertical scan range 56 Hz to 76 Hz (automatic)
Maximum preset resolution 1600 X 900 at 60 Hz
Video display capabilities (DVI & DP playback) 480p, 576p, 720p, 1080p
Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical)
VESA, 720 x 400 31.5 70.0 28.3 -/+
VESA, 640 x 480 31.5 60.0 25.2 -/-
VESA, 640 x 480 37.5 75.0 31.5 -/-
VESA, 800 x 600 37.9 60.3 40.0 +/+
VESA, 800 x 600 46.9 75.0 49.5 +/+
VESA, 1024 x 768 48.4 60.0 65.0 -/-
VESA, 1024 x 768 60.0 75.0 78.8 +/+
VESA, 1152 x 864 67.5 75.0 108.0 +/+
VESA, 1600 x 900 60.0 60.0 108.0 +/+
Video input signals
Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input
impedance
Digital DVI-D TMDS, 600mV for each differential line, positive polarity at
50 ohm input impedance
DP 1.1a signal input support
Synchronization input signals
TTL levels required and separate syncs (including Trigger points), SOG
(Composite SYNC on green)
AC input
voltage/frequency/current
100 to 240 VAC/50 or 60 Hz + 3 Hz/1.5A (Typical)
Inrush current
120 V: 30 A (Max.)
240 V: 60 A (Max.)
Connector type
15-pin D-subminiature, blue connector; DVI-D, white
connector;DP,black connector.