Replacing the display assembly, Procedure, Postrequisites – Dell Inspiron 14R (5437, Mid 2013) User Manual

Page 60

Advertising
background image

60

| Replacing

the

Display

Assembly

Replacing the Display Assembly

WARNING: Before working inside your computer, read the safety information

that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After work
ing inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 11. Fo
r additional safety best practices
information, see the Regulatory Compliance Homepage at

dell.com/regulatory_compliance.

Procedure

1

Place the display assembly on the computer base and align the screw holes on the
display assembly with the screw holes on the computer base.

2

Replace the screws that secure the display assembly to the computer base.

3

Route the antenna cable through the routing guides on the computer base.

Postrequisites

1

Follow the instructions from step 3 to step 9 in "Replacing the System Board" on
page 50.

2

Replace the palm-rest. See "Replacing the Palm-Rest" on page 36.

3

Replace the keyboard. See "Replacing the Keyboard" on page 20.

4

Replace the base cover. See "Replacing the Base Cover" on page 22.

5

Follow the instructions from step 3 to step 4 in "Replacing the Optical Drive" on
page 16.

6

Replace the battery. See "Replacing the Battery" on page 13.

book.book Page 60 Monday, April 8, 2013 1:09 PM

Advertising