Dell UPS 1920T - Manual (Page 10)

Dell UPS Management Software: Common Software Installation Scenarios
10
Figure 5: ULNM edit modules settings
Secondary server ULNM configuration:
To perform a network scan for the primary ULNM server IP address:
“Auto Discovery”  “Range Scan”  Create a new range for the IP address of the primary ULNM
server. For example, scan from 192.168.0.10 to 192.168.0.10 if your primary ULNM agent is
running on a server with IP address 192.168.0.10). Enter Administrator password for the primary
ULNM agent in this scan. Confirm the primary ULNM node is now shown in the “Auto Discovery”
menu.
Figure 6: ULNM range scan
Figure 7: ULNM Settings  Auto Discovery