Reboot the system. see, Table d, For a recommendation on how to do this – Dell PowerEdge 2650 User Manual
Page 16
After you create these macros, pressing <F1> on the keyboard while running the terminal emulation software sends <Esc><Shift>op to the server. When
these three characters are transmitted, the server interprets them as <F1>. You need this functionality to change the settings in the System Setup program or
to continue if there is an error on your system and you are prompted to press <F1>.
In addition to macros for the function keys, Dell recommends that you set up macros for the additional escape sequences listed in
.
Back to Contents Page
Table D-4. Additional Escape Sequences
Key Combination
Supported Sequence
<Alt><x>
<Alt><x> is mapped to <Esc> <Shift> x <Shift> x key sequences on the terminal, where x is a letter and X is the
uppercase letter.
<Ctrl><Alt><Del>
(This key combination reboots the
system.)
<Esc> <Shift>r <Esc> r <Esc> <Shift>r
<Ctrl><Shift>i
<Esc> <Ctrl><Shift>i
<Ctrl><Shift>j
<Esc> <Ctrl><Shift>j
<Ctrl><Shift>h
<Esc> <Ctrl><Shift>h
<Ctrl><Shift>m
<Esc> <Ctrl><Shift>m
<Ctrl>2
<Esc> <Ctrl>2