Canon CP730 - Manual (Page 37)

37
Getting Ready Printing Appendices Overview
Troubleshooting Tasks and Index Next Back
Return to Cover Page
Battery Instructions (CP730 Only)
You can print on trips and in places that lack power outlets if you
attach the separately sold battery pack to the CP730 model.
• Battery Pack NB-CP1L cannot be used in this printer.
• Do not use a battery other than that specified by Canon with this
product.
• Do not lose the battery pack terminal cover. It is required for battery
storage.
Use the following procedures to attach Battery Pack NB-CP2L to the
printer.
1
Remove the battery pack terminal cover.
2
Press the battery cover ejector lever downward to
remove the battery cover.
3
Attach the battery to the printer.
Slide the battery in the direction of the first arrow and press in the
direction of the second until it clicks into place.
To remove the battery, press the battery cover ejector lever downward and
replace the battery pack terminal cover on it.
This product is designed to achieve excellent performance when used
with genuine Canon accessories. Canon shall not be liable for any
damage to this product and/or accidents such as fire, etc., caused by
the malfunction of non-genuine Canon accessories (e.g., a leakage
and/or explosion of a battery pack). Please note that this warranty
does not apply to repairs arising out of the malfunction of non-
genuine Canon accessories, although you may request such repairs on
a chargeable basis.
Attaching the Battery
Battery Pack
Terminal Cover