Canon CP730 - Manual (Page 26)

26
Getting Ready Printing Appendices Overview
Troubleshooting Tasks and Index Next Back
Return to Cover Page
Please note the following points.
• Before you connect the printer to a computer, check whether there are
any memory cards in the printer or if a camera is connected to the printer.
• Connect the printer directly to a port on the computer with the USB
cable. It may not operate correctly via a USB hub.
• The printer may not operate correctly if another USB device (excluding
USB mice and keyboards) is used at the same time. Remove the other USB
device and reconnect the USB cable between the printer and computer.
• Do not allow the computer to go into standby (or sleep) mode when the
printer is connected to a USB port. If the computer enters this mode,
wake it up with the USB cable connected.
The following procedures are used to print from a computer. See the
following pages for details.
Install the Software
Install the software required for printing onto your computer from the
Compact Photo Printer Solution Disk.
Connect to the Computer
Connect the printer to the computer using a commercially available USB
cable.
Use the Software to Print
Use the installed applications, such as ZoomBrowser EX and Easy-
PhotoPrint (Windows), or ImageBrowser (Macintosh), to print.
ZoomBrowser EX ImageBrowser
Precautions for Printing via Computers Procedural Flow
Print from
here