Dell S300wi Projector - Manual (Page 46)

46 Using Your Projector
INPUT SELECT
The Input Select menu allows you to select your projector’s input source.
A UTO S OURCE —Select Off (the
default) to lock the current
input signal. If you press the
Source button when the Auto
Source mode is set to Off, you
can manually select the input
signal. Select On to auto detect
the available input signals. If
you press the Source button
when the Auto Source is set to
On, it automatically finds the
next available input signal.
VGA-A—Press to detect VGA-A signal.
VGA-B—Press to detect VGA-B signal.
S-V IDEO —Press to detect S-Video signal.
C OMPOSITE V IDEO —Press to detect Composite Video signal.
HDMI—Press to detect HDMI signal.
Multiple Display—Press to activate Input Select Multiple Display menu.
NOTE: The Wireless display, USB display, and USB viewer features under
Multiple Display can be used after the "Wireless / Network" feature under Set-
up in the Main Menu is Enabled. The default setting for the "Wireless / Network"
is Disabled.
A DVANCED —Press to activate Input Select Advanced menu.
Input Select Multiple Display
The Input Select Multiple Display menu allows you to activate Wireless Display,
USB Display and USB Viewer.