Solving problems, Beep codes, Inspiron – Dell Inspiron M511R (Mid 2011) User Manual

Page 54

Advertising
background image

52

This section provides troubleshooting
information for your computer. If you
cannot solve your problem using the
following guidelines, see “Using Support
Tools” on page 59 or “
Contacting Dell” on
page 79.

WARNING: Only trained service
personnel should remove the computer
cover. See the

Service Manual at

support.dell.com/manuals for advanced
service instructions.

Beep Codes

Your computer might emit a series of
beeps during start-up if there are errors or
problems. This series of beeps, called a beep
code, identifies a problem. If this occurs,
write down the beep code and contact Dell
(see “Contacting Dell” on page 79) for
assistance.

NOTE: To replace parts, see the Service
Manual
at support.dell.com.

Beep
Code

Possible Problem

One

Possible system board failure —
BIOS ROM checksum failure

Two

No RAM detected
NOTE: If you installed or
replaced the memory module,
ensure that the memory
module is seated properly.

Three

Possible system board failure —
Chipset error

Four

RAM read/write failure

Five

Real Time Clock failure

Six

Video card or chip failure

Seven

Processor failure

Eight

Display failure

Solving Problems

INSPIRON

Advertising