Using your monitor stand, Attaching the stand, Organizing your cables – Dell S199WFP Monitor User Manual
Page 22: Using the tilt
Advertising
Back to Contents Page
Using Your Monitor Stand
Dell™ S199WFP Flat Panel Monitor User's Guide
Attaching the Stand
To attach the stand:
1. Place the stand on a flat surface.
2. Fit the groove on the back of the monitor onto the two tabs on the stand.
3. Lower the monitor so that the monitor mounting area snaps on/locks to the stand.
Organizing Your Cables
After attaching all necessary cables to your monitor and computer, (See
Connecting Your Monitor
for cable attachment,) use the cable holder to neatly
organize all cables as shown above.
Using the Tilt
You can tilt the monitor to best fit your viewing needs.
NOTE: The stand is detached when the monitor is shipped from the factory.
Advertising