Dell POWEREDGE M1000E - Manual (Page 11)

Quadport Capable Hardware for the M1000e Modular Chassis
Page 9
Mezzanine Card Enumeration
Mezzanine cards are identified and ordered by: MEZZn_FAB_x. Where n is 1 to the maximum number of
mezz card slots in the blade, and X is the fabric position of the mezz card, either “B” or “C”. Figure 8 shows
this numbering in a half height and full height blade
F IGURE 8
M EZZANINE NUMBERING AND LOCATION HALF AND FULL HEIGHT BLADES
Technote: Some blades cannot support full IO capability in Fabric "C".
Refer to the IO limitation chart in this document for details