Dell Vostro 1014 (Mid 2009) - Manual (Page 47)

6. Repeat steps 4 and 5 to remove the second memory module.
Replacing a Memory Module
Ground yourself and install the memory module:
1. Align the notch in the module edge connector with the tab in the connector slot.
2. Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you do not feel the click, remove the
module and reinstall it.
3. Replace the access panel .
4. Replace the battery .
Back to Contents Page
CAUTION: Insert memory modules at a 45-degree angle to avoid damaging the connector.