Replacing the usb board – Dell Inspiron 14 (M4040, Mid 2011) User Manual
Page 48
48
USB Board
Replacing the USB Board
1 Follow the procedures in "Before You Begin" on page 9.
2 Slide the connectors on the USB board into the slots on the computer base
and align the screw hole on USB board with the screw hole on the
computer base.
3 Replace the screw that secures the USB board to the computer base.
4 Slide the USB-board cable into the connector on the system board. Press
down on the connector latch to secure the USB-board cable to the
connector on the system board.
5 Replace the optical drive. See "Replacing the Optical Drive" on page 24.
6 Follow the instructions from step 3 to step 7 in "Replacing the Palm-Rest
7 Replace the battery. See "Replacing the Battery" on page 14.
CAUTION:
Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
1
screw
2
USB board
3
USB-board cable
1
2
3