Installing handle assembly (latitude e6430 atg) – Dell Latitude E6430 (Mid 2012) User Manual

Page 6

Advertising
background image

Figure 6. Back view

1. HDMI connector
2. security cable slot
3. modem connector /WWAN pass-

through (optional)

4. device status lights (power, hard

disk, and battery)

5. power connector
6. network connector

7. USB 2.0 connector
8. VGA connector
9. audio connector

10. cooling vents
11. smart card slot

WARNING: Do not block, push objects into, or allow dust to accumulate in the air
vents. Do not store your Dell computer in a low-airflow environment, such as a
closed briefcase, while it is running. Restricting the airflow can damage the
computer or cause a fire. The computer turns on the fan when the computer gets
hot. Fan noise is normal and does not indicate a problem with the fan or the
computer.

Installing Handle Assembly (Latitude E6430 ATG)

1.

Insert a paper clip into the release holes to unlock and remove the covering plugs

from their slots.

6

Advertising