Osd warning messages – Dell 2007FP Monitor User Manual
Page 33
OSD Warning Messages
Back
Mode
When selected PIP
PIP Source
PIP Position
PIP Size
PIP Contrast
PIP Hue/Tint
PIP Saturation
Exit Menu
input)
or
NOTE:
When using DVI source, the contrast adjustment is not
available.
Push
to select Back to go back to the main menu.
There is one mode: PIP (Picture in Picture)
Use
and
to browse and
to select "Off" or "PIP".
When PIP on, choose "SWAP" to switch the main-screen and sub-screen in PIP mode.
Select an input signal for PIP. (VGA/DVI/S-Video/Composite)
Use
and
to browse and
to select.
Select PIP window position.
Use
and
to browse and
to select.
Select PIP window size.
Use
and
to browse and
to select.
Adjust the contrast level of the picture in PIP Mode.
reduce the contrast
increases the contrast
This function shifts the color of PIP image to green or purple. This is used to adjust for desired flesh tone color.
shifts image color towards green
shifts image color towards purple
Adjust the color saturation of PIP image.
makes the image look more monochrome
makes the image look more colorful
Push
to exit the OSD main menu.
When the monitor does not support a particular resolution mode you will see the following