Dell PowerVault DR2000v - Manual (Page 5)

5 Setting up RDA Backup to Dell™ DR4x00 Disk Backup Appliance on Dell™ NetVault
1 Install and Configure the DR Series Deduplication
Appliance
1. Rack and cable the DR Series Deduplication Appliance appliance, and power it on.
2. Please refer to Dell DR Series System Administrator Guide, under sections of “iDRAC Connection”,
“Logging in and Initializing the DR Series System”, and “Accessing IDRAC6/Idrac7 Using
RACADM” for using iDRAC connection and initializing the appliance.
3. Log in to iDRAC using the default address 192.168.0.120, or the IP that is assigned to the iDRAC
interface. Use user name and password of “root/calvin”.
4. Launch the virtual console.
5. After the virtual console is open, log in to the system as user administrator and the password
St0r@ge! (The “0” in the password is the numeral zero).