Ending a connection, Connecting directly to an e-mail server – Dell X50 Upgrade User Manual
Page 112
www
.dell.com | support.dell.com
112
Getting Connected
8
Tap Finish.
9
To manually start a connection, tap and hold the connection, and
tap Connect.
NOTE:
A VPN connection requires physical connection to a network.
Ensure the unit is linked to a wire or wireless network before you
manually start a VPN connection.
Ending a Connection
To disconnect:
•
To delete a connection, tap and hold the connection you want to
remove, and tap Delete.
•
When connected through a cable or cradle, detach your device from
the cable or cradle.
•
When connected through the infrared sensor, move the device away
from the computer.
•
When connected through a network (Ethernet) card, remove the card
from your device.
Connecting Directly to an E-Mail Server
You can set up a connection to an e-mail server so that you can send and
receive e-mail messages using a modem or network connection and
Messaging on your device.
NOTE:
The ISP or network must use a POP3 or IMAP4 e-mail server and an
SMTP gateway.
You can use multiple e-mail services to receive your messages. For each
e-mail service you intend to use, you must first set up and name the
e-mail service. If you want to use the same service to connect to different
mailboxes, set up and name each mailbox connection.