Craftsman HIGHSPEED SWEEPER 486.24229 User Manual
Page 7
7
Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE
sTep 9:
(see FigUre 9)
Slide the front flaps of the hopper bag up onto the
•
front of the lower hopper tubes. Secure the bag frame
tube to the lower hopper tubes using two clevis pins
(28) and hair pins (19).
NOTe: Be sure front flaps of hopper bag are positioned
above clevis pins.
Snap the sides of the bag to the bottom of the bag at
•
the front corners .
FigUre 10
sTep 10:
(see FigUre 10)
Slide a rear hopper tube (11) onto the two upper
•
hopper tubes (6).
Secure the upper hopper tubes (6) to the rear hopper
•
tube (11) using two 1/4" x 1" curved head bolts (26)
and 1/4" nylock nuts (24). Bolt heads should face up.
sTep 11:
(see FigUre 11)
Slide the assembled tubes down through the flaps in
•
the sides of the hopper bag (3) as shown.
sTep 12:
(see FigUre 12)
Slide the assembled tubes back up underneath the
•
wind screen as shown.
11
26
26
24
24
6
6
28
19
FigUre 9
FigUre 11
FigUre 12