Palm rest, Removing the palm rest – Dell Inspiron 300m User Manual
Page 28
Back to Contents Page
Palm Rest
Dell™ Inspiron™ 300m Service Manual
Removing the Palm Rest
1.
Remove the
battery
.
2.
Remove the
keyboard
.
3.
Turn the computer over, and remove the three M2 x 4-mm screws from the bottom of the computer.
4.
Turn the computer over, and open the display.
5.
Remove the six M2 x 4-mm screws on the palm rest.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Owner's Manual.
NOTICE:
Disconnect the computer and any attached devices from electrical outlets.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE:
Read "
Before You Begin
" before performing the following procedure.
1
M2X4 screw (3)