Dell Precision T5500 (Early 2009) - Manual (Page 31)

Floppy Drive
Dell Precision™ T5500 Service Manual
Removing the Floppy Drive
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the computer cover .
3. Remove the front bezel .
4. Remove the drives bezel .
5. Disconnect the power and data cables from the back of the floppy drive.
6. Push the sliding plate lever down to release the floppy drive.
7. Remove the floppy drive from the computer.
Replacing the Floppy Drive
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the computer cover .
3. Remove the front bezel .
4. Remove the drives bezel .
5. Connect the power and data cables to the back of the floppy drive.
6. Push the sliding plate lever down.
7. Place the floppy drive in the computer.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.