After working inside your tablet-p c, After working inside your tablet-pc – Dell Latitude XT2 (Early 2009) User Manual

Page 85

Advertising
background image

l

In Windows Vista:

Click Start

, then click the arrow in the lower-right corner of the Start menu as shown below, and then click Shut Down.

l

In Windows XP:

Click Start® Turn Off Computer® Turn Off.

The Tablet-PC turns off after the operating system shutdown process is complete.

2.

Ensure that the Tablet-PC and all attached devices are turned off. If your Tablet-PC and attached devices did not automatically turn off when you shut
down your operating system, press and hold the power button for about 4 seconds to turn them off.

After Working Inside Your Tablet-PC

After you complete any replacement procedure, ensure you connect any external devices, cards, and cables before turning on your computer.

1.

Connect any external devices, such as a port replicator, battery slice, or media base, and replace any cards, such as an ExpressCard.

2.

Connect any telephone or network cables to your Tablet-PC.

3.

Replace the

main battery

.

4.

Connect your Tablet-PC and all attached devices to their electrical outlets.

5.

Turn on your Tablet-PC.

 

CAUTION:

To avoid damage to the Tablet-PC, use only the battery designed for this particular Dell computer. Do not use batteries designed for

other Dell computers.

CAUTION:

To connect a network cable, first plug the cable into the network device and then plug it into the computer.

Advertising