Dell OptiPlex G1 - Manual (Page 2)

Removing and Replacing Parts: Dell OptiPlex GX1 Systems Service Manual
file:///C|/infodev/2013/eDoc/OpGX1/SM/remsff.htm[2/21/2013 11:45:32 AM]
Back to Contents Page
Removing and Replacing Parts: Dell™ OptiPlex™ GX1 Small-
Form-Factor Systems Service Manual
Overview System Power Supply
Recommended Tools Riser Board
Precautionary Measures System Board Components
Internal Views Expansion-Card Cage
Computer Cover Expansion Cards
Eject and Power Buttons DIMMs
Control Panel Microprocessor/Heat Sink Assembly
Chassis Intrusion Switch System Battery
Drives System Board
Overview
This section provides procedures for removing and replacing the components, assemblies, and
subassemblies in the Dell OptiPlex small-form-factor chassis GX1 system.
Unless otherwise noted, each procedure assumes that the following conditions exist:
You have performed the steps in " Precautionary Measures ."
You have removed the computer cover .
You can replace or reinstall a part by performing the removal procedure in reverse order unless
additional information is provided.
Recommended Tools
Most of the procedures in this manual require the use of one or more of the following tools:
#1 and #2 Phillips-head screwdrivers
1/4-inch nut driver
Also, use a wrist grounding strap as explained in " Precautionary Measures ."