Installing the heatsink, Removing the memory module – Dell Vostro 14 (5480, Late 2014) User Manual
Page 21
Advertising
Installing the Heatsink
1.
Place the heatsink into its original position on the system board.
2. Tighten the screws to secure the heatsink to the system board.
3. Install:
a.
b.
c.
After Working Inside Your computer
Removing the Memory Module
1.
Before Working Inside Your Computer
2. Remove:
a.
b.
c.
d.
3. Pry the retention clips away from the memory module until it pops up. Remove the memory module
from its connector on the system board.
21
Advertising