Replacing the optical drive – Dell Studio 1458 (Early 2010) User Manual
Page 37
11.
Lift the optical drive away from the computer base.
Replacing the Optical Drive
1.
Follow the procedures in
Before You Begin
.
2.
Place the optical drive on the computer base.
3.
Replace the screw that secures the optical drive to the system board.
4.
Replace the palm rest (see
Replacing the Palm Rest
).
5.
Replace the keyboard (see
Replacing the Keyboard
).
6.
Turn the computer over and replace the screw that secures the optical drive to the computer base.
7.
Replace the memory modules (see
Replacing the Memory Module(s)
).
8.
Replace the hard drive (see
Replacing the Hard Drive
).
9.
Replace the Mini-Cards, if applicable (see
Replacing the Mini-Card
).
10.
Replace the base cover (see
Replacing the Base Cover
).
11.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
1
screw
2
optical drive