Dell Vostro 1015 (Mid 2009) - Manual (Page 25)

Back to Contents Page
I/O Board
Dell™ Vostro™ 1014/1015 Service Manual
Removing the I/O Board
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the battery .
3. Remove the access panel .
4. Remove the hard drive .
5. Remove the WLAN card .
6. Remove the control panel cover .
7. Remove the keyboard .
8. Remove the display assembly .
9. Remove the palm rest .
10. Remove the two screws that secure the I/O board to the computer chassis.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.