Modem connector, Replacing the cir board, Removing the modem connector – Dell Inspiron 1520 (Mid 2007) User Manual
Page 5
8.
Remove the palm rest (see
Removing the Palm Rest
).
9.
Remove the M2.5 x 5-mm screw that secures the CIR board to the base of the computer.
10.
Lift the CIR board out of the computer.
11.
Disconnect the CIR cable from the CIR board.
Replacing the CIR Board
1.
Connect the CIR cable to the CIR board.
2.
Align the screw hole in the CIR board with the screw hole in the base of the computer, and then lower the board into place.
3.
Replace the M2.5 x 5-mm screw and secure the CIR board to the base of the computer.
4.
Replace the palm rest (see
Replacing the Palm Rest
).
5.
Replace the internal card with Bluetooth wireless technology, if installed (see
Replacing the Bluetooth Card
).
6.
Replace the display assembly (see
Replacing the Display Assembly
).
7.
Replace the keyboard (see
Replacing the Keyboard
).
8.
Replace the hinge cover (see
Replacing the Hinge Cover
).
9.
Replace the hard drive (see
Replacing the Hard Drive
).
10.
Replace the optical drive (see
Replacing the Optical Drive
).
Modem Connector
Removing the Modem Connector
1.
Follow the instructions in
Before You Begin
.
2.
Remove the optical drive (see
Removing the Optical Drive
).
3.
Remove the hard drive (see
Removing the Hard Drive
).
NOTICE:
Do not disconnect the CIR cable from the system board.
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.