Dell U3011 Monitor - Manual (Page 22)

Display Settings Use the Display Settings to adjust image.
Wide Mode Adjust the image ratio as 16:9, 4:3, 1:1, Aspect or full screen.
Horizontal Position
Use the or to adjust image left or right. Minimum is '0' (-). Maximum is '100' (+).
Vertical Position
Use the or to adjust image up or down. Minimum is '0' (-). Maximum is '100' (+).
NOTE: Horizontal Position and Vertical Position Adjustments are only available for "VGA" input.
Sharpness
This feature can make the image look sharper or softer. Use or to adjust the sharpness from '0' to '100'.
Noise Reduction Improve the motion picture quality by reducing noise on image edge.
NOTE: Noise Reduction is only available for Multimedia, Game and Movie modes.
Pixel Clock The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference.
Use the or to adjust for best image quality.
Phase If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase
(fine), again.
NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.
Dynamic Contrast Allows you to increase the level of contrast to provide sharper and more detailed image quality. (Brightness control is disabled while
in Dynamic Contrast mode and will be grayed out.)
Touch the button to select the Dynamic Contrast "On" or "Off" .
NOTE: Dynamic Contrast is only available for Game and Movie color preset modes.
Display Info Displays the monitor's current settings.
Reset Display
Settings Select this option to restore default display settings.
Audio Settings Select this option to adjust the audio settings.
Line Out Source Use the Line Out Source menu to select between different audio signals that may be connected to your monitor.