Dell PowerVault DR2000v - Manual (Page 39)

39 Setting Up Dell™ DR Series Disk Backup Appliance as Backup to Disk Target on Symantec NetBackup™ | January 2014
A Appendix
A.1 Create a Storage Unit for CIFS
There are two options for Symantec NetBackup to authenticate to DR Series Deduplication Appliance
through CIFS.
4. Integrate Symantec NetBackup Server and DR Series Deduplication Appliance with Active
Directory
a. Ensure the AD user has appropriate ACLs to the DR Series Deduplication Appliance Container
share
b. Set the Symantec NetBackup service to run with this AD user <Domain\User>
5. Ensure that the following services are run by a service or domain account that has full access to
the DR Series Deduplication Appliance container share UNC path:
• NetBackup Client Service
• NetBackup Remote Manager and Monitor Service
• NetBackup Service Layer
a. To set the password for local CIFS administrator on the DR Series Deduplication Appliance, log on
to the DR using SSH.
i. Log on with username Administrator and password St0r@ge!
ii. Run the following command:
Authenticate - - set - - user administrator
Note: The CIFS administrator account is a separate account from the administrator account used to
administer the appliance. After an authentication method is chosen, set the Symantec NetBackup service
account to use the CIFS administrator account.
b. Launch Microsoft Services Snap- in by clicking Start > Run > Services.msc > Enter.
c. Locate the services. Right- click Properties and click the Log On tab.