Dell Precision M2300 (Late 2007) User Manual
Page 28
1.
Follow the procedures in "Before You Begin" on page 111.
2.
Remove the hinge cover (see "Hinge Cover" on page 113).
3.
Remove the keyboard (see "Keyboard" on page 113).
4.
Ground yourself by touching one of the metal connectors on the back of the computer.
5.
Move the antenna cables away from the FCM card, ensuring that the protective sleeves do not slide off the cables.
6.
Release the card by pushing the metal securing brackets away from the card until the card pops up slightly.
7.
Lift the card out of its connector.
Back to Contents Page
NOTE:
If you ordered an FCM card with your computer, the card is already installed.
NOTE:
If you leave the area, ground yourself again when you return to the computer.
1
FCM card
2
antenna cables (2)
3
metal securing brackets (2)
1
FCM card
NOTICE:
When installing this card, ensure the two antenna cables are not under the card. The antenna cables are designed to lay across the top of
the FCM card and in the protective sleeve. Installing the card on top of these antenna cables may cause damage to your computer. Also, do not install
the FCM card in the WLAN card connector. The FCM card is designed to work in the WWAN card connector. Installing the card in the wrong slot may
cause damage to your computer.