Figure 6, Removing a processor fan – Dell PowerEdge 2800 User Manual
Page 48
l
Two processor cooling fans for each processor installed in the system (fans 1 through 4)
l
Two memory module cooling fans (fan 5 and fan 6)
l
Two expansion-card cooling fans (fan 7 and fan 8)
Figure 6-3. Cooling Fans
Removing a Processor Fan
1.
Open the system. See "
Opening the System
" in "Troubleshooting Your System."
2.
Press the release tab on the fan carrier and lift the fan out of the center fan bracket. See
Figure 6-4. Installing and Removing a Processor Fan
NOTICE:
In the event of a problem with a particular fan, the fan's number is referenced by the system's management software, allowing you to easily
identify and replace the proper fan.
CAUTION:
Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See
your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against
electrostatic discharge.