Optical drive, Removing the optical drive, Replacing the optical drive – Dell Inspiron 6000 User Manual
Page 28
Back to Contents Page
Optical Drive
Dell Inspiron™ 6000 Service Manual
Removing the Optical Drive
Your computer ships with a fixed optical drive installed.
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Turn the computer over and remove the M2.5 x 8-mm screw.
3.
Turn the computer over and remove the M2.5 x 8-mm screw from the indention labeled with a lock symbol (
).
4.
Insert a screwdriver into the indention and push the notch on the metal tab to release the drive from the bay.
5.
Pull the drive out of the drive bay.
Replacing the Optical Drive
1.
Slide the drive into the slot until it snaps securely into place.
2.
Replace the M2.5 x 8-mm screw.
Back to Contents Page
CAUTION:
Before you perform the following procedures, see the safety instructions in the Product Information Guide.
NOTICE:
To prevent damage to devices, store them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them or
placing heavy objects on top of them.
1
metal tab
2
optical drive