Dell P2011H Monitor User Manual
Page 26
Display Setting submenu for DVI-D input
Wide Mode
Adjust the image ratio as 4:3 or full screen.
Horizontal Position
Use the
and
buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).
NOTE:
When using a DVI source, the Horizontal Position setting is not available.
Vertical Position
Use the
and
buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).
NOTE:
When using a DVI source, the Vertical Position setting is not available.
Sharpness
This feature can make the image look sharper or softer. Use
or
to adjust the sharpness from '0' to '100'.
Pixel Clock
T
he Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference.
Use the
and
buttons to adjust for best image quality.
Phase
If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase
(fine), again.
NOTE:
Pixel Clock and Phase Adjustments are only available for "VGA" input.
Dynamic
Contrast
The Dynamic Contrast adjustment helps the user to get a higher contrast if you choose Game preset, Movie Preset, Sports Preset
and Nature Preset.
Use the
button to enable the Dynamic Contrast adjustment.
Use the
button to disable the Dynamic Contrast adjustment.
NOTE:
Dynamic Contrast is not available (greyed out) in Energy Smart modes.
Reset Display Settin
gs
Select this option to restore default display settings.
OTHER SETTINGS
Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on
screen, and so on.