Display bezel, Removing the display bezel, Replacing the display bezel – Dell Studio 1535 (Mid 2008) User Manual

Page 18

Advertising
background image

 

7.

Replace the keyboard (see

Replacing the Keyboard

).


 

8.

Replace the center control cover (see

Replacing the Center Control Cover

).


 

9.

Close the display and turn the computer over.

 

10.

Replace and tighten the two screws securing the display assembly to the bottom of the computer.

 

11.

Replace the Mini-Card and connect the antenna cables to it (see

Replacing the Mini-Card

).


 

12.

Replace the base cover (see

Replacing the Base Cover

).

 

Display Bezel

 

Removing the Display Bezel

 

 

 

1.

Follow the instructions in

Before You Begin

.


 

2.

Remove the display assembly (see

Removing the Display Assembly

).

 

3.

Gently push the display bezel outwards on each of the four sides to release the bezel from the display panel.

 

Replacing the Display Bezel

 

 

1.

Follow the instructions in

Before You Begin

.


 

2.

Starting at any corner, use your fingers to gently snap the bezel into place to secure it to the display panel.

 

3.

Replace the display assembly (see

Replacing the Display Assembly

).

CAUTION:

Before you begin the following procedure, follow the safety instructions that shipped with your computer.

CAUTION:

The following instructions are not applicable to Edge-to-Edge display panels, which should not be disassembled.

NOTICE:

Removal of the bezel from the display bottom cover requires extreme care to avoid damage to the bezel and the display panel.

1 display bezel

NOTE:

In some computers, the display bezel might have double-sided tape on both ends. To reuse the tape, carefully remove the bezel.

CAUTION:

Before you begin the following procedure, follow the safety instructions that shipped with your computer.

Advertising