Dell PowerVault DR2000v - Manual (Page 18)

18 Setting Up the Dell™ DR Series System as a CIFS Backup Target on EMC Networker | February 2014
Note: On DR4x00 systems, the maximum supported CIFS connections per appliance is 32; on the
DR6000 system the maximum is 64. Therefore, there should not be more than 32 and 64 corresponding
clients connected/mapped to a single DR Series system for backup at the same time. For details, see the
Dell DR Series System Interoperability Guide .
11. The new Networker device should have Pool Type set to Backup. Click Next.
12. Review the configuration and then click Configure.