Dell Latitude E5430 (Mid 2012) - Manual (Page 52)

4. Remove the power connector.
Installing the Power Connector
1. Install the power connector in the computer.
2. Thread the power connector in the routing channel.
3. Install:
a. system board
b. left support bracket
c. display assembly
d. ExpressCard reader cage
e. palmrest
f. thermal module
g. right base panel
h. WLAN card
i. hard drive
j. optical drive
k. keyboard
l. keyboard trim
m. access panel
n. battery
o. ExpressCard
p. SD memory card
4. Follow the procedures in After Working Inside Your Computer.
52