Dell PowerEdge 1800 User Manual
Page 6
Advertising
4
Power Supply Upgrade Installation Guide
www
.dell.com | support.dell.com
Figure 1-1.
Removing the Baffle/Back Fan Assembly
6 Disconnect all power cables from the SATA hard drives or SCSI backplane, diskette drive,
optical drive, and any other installed drive.
7 Disconnect the power cables from system-board power connectors P1 and P2.
8 Open the power-cable retention clips and remove the power cables from the clips. See
9 From the back of the system, remove the two screws that secure the power supply to the
10 Use the power supply handle to carefully slide the power supply out of the system.
baffle/back
fan assembly
front release tab
back release tab
securing tabs (2)
chassis guide
chassis guide
Advertising