Installation, Installing into the rack – Dell 1U Rackmount LED Console User Manual
Page 7
Advertising
2
Installation
xxx
|
xxx
3
Installation
Installing into the Rack
This section provides instructions for installing the Dell 1U Rackmount
LED Console Tray in a four-post rack cabinet. The pullout tray assembly
features a keyboard with touchpad and a flat-panel monitor that rotates up from
the console tray for use. An attached cable-management arm routes the monitor,
power, USB and keyboard/touchpad cables to the back of the rack. The monitor's
power supply is installed on the console tray.
Install the console tray using Dell ReadyRails™ II slide rails in any system
manufacturer's rack cabinets.
For removal instructions, see "Removal from the Rack" on page 23
NOTE: 1U of free rack space is required to mount the 1U Rackmount LED Console Tray.
Advertising