Removing the display assembly, Prerequisites, Procedure – Dell Inspiron 20 (3043, Mid 2014) User Manual

Page 54

Advertising
background image

Removing the Display

Assembly

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in

Before Working Inside Your Computer

. After working inside your

computer, follow the instructions in

After Working Inside Your

Computer

. For more safety best practices, see the Regulatory

Compliance home page at dell.com/regulatory_compliance.

Prerequisites

1

Follow the instructions from step 2 to step 4 in “Removing the

Back

Cover

”.

2 Remove the

speakers

.

3 Follow the instructions from step 1 to step 5 in “Removing the

System

Board

”.

Procedure

1

Peel off the Aluminium foil tape that secures the antenna cable and

camera and control-buttons board cable to the display panel.

2 Peel off the Aluminium foil tape that secures the antenna cable to the

display panel.

3 Press the connector latches and disconnect the display cable from the

display panel.

4 Disconnect the display-backlight cable from the display panel.

54

Advertising