Dell KVM 4322DS - Manual (Page 7)

Mounting and Cable Routing Procedures for Dell™ Digital KVM’s (1082DS, 2162DS, 4322DS)
Page 5
Figure 2: KVM Mounted on Horizontal Member
1.2 Supported Locations in the PowerEdge 4820, 4220, and 2420
The PowerEdge 4820, 4220, and 2420 support mounting the KVM to the vertical members of the rack.
The PowerEdge 4820 and 4220 support mounting four digital KVMs on the vertical members, two on
the left side, top and bottom, and two on the right side, top and bottom. The PowerEdge 2420
supports mounting two digital KVMs on the vertical members, one on the left side and one on the
right side. The PowerEdge 4820, 4220, and 2420 do not support mounting the KVM to the horizontal
members of the rack. The 0U mounting space on the PowerEdge 4820, 4220, and 2420 offers
restricted access to the ports on the back of the KVM unless the side panels can be removed.
Please note that installation of the KVM where the ports face the ground is an unsupported
orientation, and can cause damage to the KVM.
See Figure 3 for the supported location to mount the Digital KVM in the aforementioned racks.
PowerEdge 2410 Horizontal PowerEdge 4210 Horizontal