Solving problems, Beep codes, Inspiron – Dell Inspiron 17R (N7110, Early 2011) User Manual

Page 56

Advertising
background image

54

This section provides troubleshooting
information for your computer. If you cannot
solve your problem using the following
guidelines, see “Using Support Tools” on
page 60 or “
Contacting Dell” on page 80.

WARNING: Only trained service
personnel should remove the computer
cover. See the

Service Manual at

support.dell.com/manuals for advanced
service instructions.

Beep Codes

Your computer might emit a series of
beeps during start-up if there are errors or
problems. This series of beeps, called a beep
code, identifies a problem. If this occurs,
write down the beep code and contact Dell
(see “Contacting Dell” on page 80) for
assistance.

NOTE: To replace parts, see the Service
Manual
at support.dell.com.

Beep
Code

Possible Problem

One

Possible system board failure —
BIOS ROM checksum failure

Two

No RAM detected
NOTE: If you installed or replaced
the memory module, ensure that
the memory module is seated
properly.

Three

Possible system board failure —
Chipset error

Four

RAM read/write failure

Five

Real Time Clock failure

Six

Video card or chip failure

Seven

Processor failure

Eight

Display failure

Solving Problems

INSPIRON

Advertising