Heat sink and processor, Removing the heat sink and processor – Dell OptiPlex 780 User Manual
Page 42
Advertising
Back to Contents Page
Heat Sink and Processor
Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual
WARNING:
Before working inside your computer, read the safety information that shipped with your
computer. For additional safety best practices information, see the Regulatory Compliance Homepage
at www.dell.com/regulatory_compliance.
Removing the Heat Sink and Processor
NOTE:
You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the
cover
.
3. Remove the
front bezel
.
4. Remove the
drive cage
.
5. Disconnect the fan cable from the system board.
Advertising