Dell Latitude Cpi - Manual (Page 5)

Dell Latitude CP Before You Turn On Your Computer 1-3
6. Use the Boot Controller tab to tune each drive in
a specific DMA channel.
SCSI Controller Driver
If your computer uses Windows NT, use the following
procedure to install the driver for the SCSI controller on
the C/Dock Expansion Station.
The diskettes you need in this procedure came with the
C/Dock Expansion Station.
NOTE: You must have administrator privileges to per-
form the following procedure.
1. Undock the computer.
2. Click the Start button, point to Settings, and click
Control Panel.
3. Double-click the SCSI Adapters icon.
4. Click the Drivers tab and click Add.
5. In the Install Driver window, click the Have Disk
button.
6. Insert the Dell Latitude C/Dock Expansion Station
Windows NT 4.0 SCSI Driver diskette into the
computer’s diskette drive.
7. In the Copy the manufacturer’s files from box,
type
a:\ and click OK.
8. At the Install Driver window, click OK.
9. In the Windows NT Setup window, type a:\ and
click Continue.
10. When prompted to restart the computer, remove
the diskette and click Yes.
Network Controller Driver
If your computer uses Windows NT, use the following
procedure to install the network driver if you want to
connect a C/Dock Expansion Station or C/Port APR to a
network.
NOTE: You must have administrator privileges to per-
form the following procedure. If necessary, see your
network administrator before beginning this procedure.
1. Shut down and dock the computer; then press the
power button and log on.
If a PCI video card is installed in the C/Dock Expan-
sion Station, select Windows NT Workstation
Version 4.00 (VGA mode).
If there is no PCI video card installed, select Win-
dows NT Workstation Version 4.00.
2. If a PCI video card is installed in the C/Dock
Expansion Station, continue with step 3. If there
is no PCI video card installed, or if you are using
a C/Port APR, go to step 9.
3. At the Invalid Display Settings window, click OK.
4. At the Display Properties window, click Load
Drivers Now.
5. Click Display Type.
6. Click Change.
7. Click Have Disk.
8. Install the PCI video card driver.
For instructions, see “Installing a Windows NT
Driver for a PCI Video Card” in the document titled
“Before You Dock” that came with the C/Dock
Expansion Station.
9. Highlight the Network Neighborhood icon on the
desktop and right click.
10. From the menu, select Properties.
11. In the Network window, click the Adapters tab.
12. Click Add.
13. Click Have Disk.
14. Type c:\drvlib\netcard\x86\3c90x and
click OK.
15. In the Select OEM Option window, highlight
3Com Fast EtherLink XL Adapter (3C905) and
click OK.
16. After the driver is installed, click Continue.
17. In the 3Com NIC Diagnostics window, select the
Properties tab.
18. In the Individual Settings box, click Media Type
and set the option to Autoselect.
19. In the 3NICDiag window, click OK.
20. In the 3Com NIC Diagnostics window, click OK.
21. When prompted, click No to change configura-
tion settings and restart your computer.
22. In the Network window, click the Identification
tab.
23. Click Change.