Dell PowerVault 220S (SCSI) - Manual (Page 6)

6
Updating the Enclosure Management Module Firmware
www
.dell.com | support.dell.com
FILE LOCATION: S:\systems\Zappa\Ts\EMM Firmware_N8865\N8865eb0.fm
DELL CONFIDENTIAL – PRELIMINARY 10/26/04 – FOR PROOF ONLY
Table 1.1 lists the required tool and files for applying an update to your storage system.
Updating Storage Systems Attached to Cluster Servers
To update the EMM firmware in a cluster-attached storage system, perform the following steps:
1 Shut down node 2 in the cluster.
2 On node 1, update the EMM firmware in the attached storage system using the procedure
found later in this document that applies to your host configuration.
Table 1-1. Firmware Update Procedures
Operating System Download File Array
Manager
DUP Update Utility
Microsoft
®
Windows
®
2000
Server and Advanced Server
FUPG_Exx.exe (A.M.)
or
PV220s-221s-FRMW-
Rxxxxx.exe (DUP)
Microsoft Windows Server™ 2003 FUPG_Exx.exe (A.M.)
or
PV220s-221s-FRMW-
Rxxxxx.exe (DUP)
Microsoft Windows Server 2003
Enterprise Edition (64-bit) pv2xxAxx.exe
Novell
®
NetWare
®
FUPG_Exx.exe
Red Hat
®
Enterprise Linux (Version
3) for Intel
®
x86
PV220s-221s-FRMW-
Rxxxxx.bin
Red Hat Enterprise Linux (Version
3) for Intel
®
Extended Memory 64
Technology (EM64T)
pv2xxAxx.gz
and
FUPG_Exx.exe
Red Hat Enterprise Linux (Version
3) for Intel Intanium
®
pv2xxAxx.gz
Red Hat Enterprise Linux AS
(Version 2.1) PV220s-221s-FRMW-
Rxxxxx.bin
Red Hat Linux, versions 7.x, 8.x, 9
pv2xxLxx.gz