Removing the speaker, Installing the speaker, Memory module guidelines – Dell OptiPlex 9020 (Mid 2013) User Manual
Page 17
4.
Install the:
a) drive cage
b) optical drive
c) cover
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Speaker
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a) cover
b) optical drive
c) drive cage
3.
Disconnect the speaker cable from the system board and release it from the securing tab inside the chassis. Press
the speaker-securing tab, and slide the speaker towards the right of the computer to release it.
Installing the Speaker
1.
Place the speaker at the appropriate location on the chassis.
2.
Press the speaker-securing tab and slide the speaker towards the left of the computer to secure it.
3.
Guide the speaker cable through the securing tab and connect the speaker cable to the system board.
4.
Install the:
a) drive cage
b) optical drive
c) cover
5.
Follow the procedures in
After Working Inside Your Computer
.
Memory Module Guidelines
To ensure optimal performance of your computer, observe the following general guidelines when configuring your
system memory:
17