Cisco 7926G - Manual

xi
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
Preface
This chapter describes the intended audience, objectives, organization, and lists related documentation.
It contains the following sections:
• Overview, page xi
• Audience, page xi
• Organization, page xii
• Related Documentation, page xiii
• Obtaining Documentation and Submitting a Service Request, page xiii
Overview
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide provides the
information you need to understand, install, configure, and manage the Cisco Unified Wireless
IP Phone 7925G, 7925G-EX, and 7926G on your network. This guide is intended to be used to
administer phones running with Cisco Unified Communications Manager Release 4.3 and later.
Audience
Network engineers, system administrators, or telecom engineers should review this guide to learn the
steps required to properly set up the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G on
the wireless network.
The tasks described are considered to be administration-level tasks and are not intended for end-users of
the phones. Many of the tasks involve configuring network settings and could affect the phone
functioning in the network.
Because of the close interaction between the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and
7926G and Cisco Unified Communications Manager, these tasks require familiarity with Cisco Unified
Communications Manager.