Dell UPS 2700R - Manual (Page 8)

Dell UPS Management Software: Activating redundancy and virtualization modules
8
5. Check the “Log” page, and you will see that the alarms are no longer being generated.
Figure 8. MUMC  Settings  Log  System logs
6. If desired, delete the existing log entries by clicking “Purge system logs” in the menu to the right,
as shown in the following figure.
Figure 9. MUMC  Settings  Log  Purge system logs
Activating redundancy and virtualization modules is now complete.
Summary
Activating Redundancy and Virtualization modules in the Dell UPS software management console
(MUMC) enables redundant power management and control of Dell UPS in a variety of applications.
However, if the Shutdown module is not also enabled, the system will generate error messages.
Eliminating these error messages is as easy as clicking a checkbox in the Modules Settings to enable the
Shutdown module.