Dell U2413 Monitor - Manual (Page 9)

1
Bottom View
Bottom view without monitor stand
Label Description Use
NOTE: Headphone usage is not supported for the audio line out connector.
2
DC power
connector for
Dell Soundbar
3 Audio Out
4
DisplayPort in
connector
5
Mini
DisplayPort in
connector
6 DVI connector
7
HDMI
connector
8
DisplayPort out
(MST)
connector
9
USB upstream
port
10
USB
downstream
port
11
Stand lock
feature
Connect the power cable.
Connect the power cord for the soundbar (optional).
Connect the soundbar mini stereo plug (Support two channel output ).
Connect your computer with DP cable.
Connect your computer with Mini DP to DP cable
Connect your computer with DVI cable. For U2713H, use only DVI dual-link cable provided in box (or
other certified dual-link cable) for this connection only.
Connect your computer with HDMI cable.
DisplayPort output for MST (Multi-Stream Transport) capable monitor. DP 1.1 monitor can only be
connected as the last monitor in the MST chain. To enable MST, refer to instruction on section
" Connecting the Monitor for DP MST Function ".
Connect the USB cable that came with your monitor to the computer. Once this cable is connected, you
can use the USB connectors on the monitor.
Connect your USB device. You can only use this connector after you have connected the USB cable to
the computer and USB upstream connector on the monitor.
To lock the stand to the monitor using a M3 x 6 mm screw (the screw is not provided).
AC power cord
connector